Paul Wood Machines
Leadermac compact moulding machine type LMC-532C (U)
New in:
TECHNICAL DATA:
MIN.WORKING WIDTH : 15 mm
MAX.WORKING WIDTH : 320 mm (WITH A TOOL CUTTING CIRCLE OF 163mm)
MIN.WORKING THICKNESS : 10 mm
MAX.WORKING THICKNESS : 150 mm (WITH A TOOL CUTTING CIRCLE OF 163mm)
Minimum length of single work piece:800mm
Minimum length of work piece when fed consecutively:300mm
The machine was purchased for a project which sadly failed to materialise, therefore the machine was only delivered but never commissioned or run.
Additionally there is an extractor unit available if required at an additional cost
The machine is being offered as it is ex site
£22,000.00 + VAT invoice
Offered ex site as is condition.
Delivery can be arranged at an additional cost
Call for further details
METALSTAR 2000 FUTURA – Four sided planer – JUNIOR 4
New in:
A 4 sided planning machine 2018, which has had little use and only used for light work so is really great condition
Technical specifications:
PLANER SPINDLE MOTOR POWER (1ST UNIT) kW 4 (HP 5,5)
RH SPINDLE MOTOR POWER (2ND UNIT) kW 4 (HP 5,5)
LH SPINDLE MOTOR POWER (3RD UNIT) kW 4 (HP 5,5)
TOP HORIZONTAL SPINDLE MOTOR POWER (4TH UNIT) kW 4 (HP 5,5)
FEED MOTOR POWER kW 1,5/1,1 (HP 2/1,4)
DIMENSION (HxLxW) 1600x3200x1200 mm
MAX. WORKING WIDTH (WITH TOOL DIA 100 MM) 180 mm
MIN. WORKING WIDTH (WITH TOOL DIA 100 MM) 25 mm
MAX. WORKING HEIGHT (WITH TOOL DIA 100 MM) 130 mm
MIN. WORKING HEIGHT (WITH TOOL DIA 100 MM) 8 mm
MIN WORKPIECE LENGTH (SINGLE PIECE) 270 mm
SPINDLE SPEED 6000 rotations per minute
INFEED TABLE LENGTH 130 mm
PLANING TOOLS DIMENSIONS (VERTICAL) 100 x 130 mm
PLANING TOOLS DIMENSIONS (HORIZONTAL) 100 x 190 mm
Offered ex site as is condition.
Call for further details
Boere sanding machine Elite 1300 TKC
Boere sanding machine Elite 1300 TKC
New in:
The machine is working but will need a good service. Ideal for a solid wood/joinery company. Being offered as it is ex site Bedfordshire. More photos
available if required.
NOW SOLD
SCM SI 350 Class panel saw
Boere sanding machine Elite 1300 TKC
Taken in part exchange this 2017 saw is in nice condition and offered as it is .
3 phase operation.
3200mm cutting length X 1500mm wide rip cut saw blade projection 118mm with a 350mm blade
AP system for the overhead protection
Pushbuttons integrated in the sliding carriage
LED readout for rip fence
Manuals and tools in plastic case
The machine has been cleaned and checked and can be viewed 2 mins from J4 of the M40
You can own this machine from over £25.00 per week, with finance subject to final underwriting procedures.
The figure is based upon a established business trading over 3 years and with a positive net worth and no adverse status.
Finance is administered through First Business Finance UK Ltd who are regulated by the Financial Conduct Authority
Other options and rates available subject to final underwriting procedures
Now sold
SCM Olympic K560 T-ER2 Edgebander in A1 condition
NOW SOLD
For sale: SCM Olympic K560 T-ER2 Edgebander in as new condition.
A rare chance to purchase a very modern edgebander which was manufactured in 2022, which was supplied new in 2023.
The machine has had little use, so is in almost as new condition.
The machine is equipped with the following features;
Star-touch display 12” touch electronic screen controller.
Panel spacer device on infeed fence.
Panel edge spray devise.
Pre-milling unit.
SGP multi-use glue tank.
End trim with 2 motors with straight/angle end trimming functions.
Top & bottom trimming unit.
Corner rounding unit with 2 motors for all round trimming.
Edge scraping unit with nesting coping devise, kit RC-N.
Glue scraping unit with nesting coping devise.
Spray mist devise for edge finishing.
Buffing unit for edge polishing.
Illuminated safety hoods.
It also comes with the factory manual, tool kit, a few spares together with
samples of EVA and PUR glues.
See this machine at its new site.
Brandt KD68cf edgebander in good workin order
NOW SOLD
For sale: Brandt KD68cf edgebander
The machine is equipped with the following
Pre-milling unit.
Quick melt glue tank.
End trim with 2 motors .
Top & bottom trimming unit.
Corner rounding unit with 2 motors
Edge scraping unit radius
Buffing unit for edge polishing.
Recently fitted with new parts
Collection Northants
Biesse Selco saw EB 100 3.2
Felder CF 741 S combination machine
Biesse Selco saw EB 100 3.2
NOW SOLD
The machine is in good condition and ready for work. Equipped with auto side aligner, air tables and a useful sawblade projection of 100 mm makes for an ideal jobbing machine suitable for all types of panel work. Can be seen running.
SCM Multirip saw M3 1997
Felder CF 741 S combination machine
Biesse Selco saw EB 100 3.2
NOW SOLD
The machine is in good working order but could benefit from a service. It is being offered as it is, ex site north London. Forklift loading is possible.
Availability: soon, as still in production.
Felder CF 741 S combination machine
Felder CF 741 S combination machine
Felder CF 741 S combination machine
NOW SOLD
The machine is in good condition and ready for work.
Saw, spindle moulder, planner and thicknesser. Loads of accessories.
Saw table length 2.2. This machine would suit either a small workshop or specials dept. Planner/thicknesser unit has a spiral knife cutter block, tilting spindle moulder, etc.
Biesse Rover K 1232
Felder CF 741 S combination machine
NOW SOLD
The machine is in excellent condition and has had very little use. With a 12 place tool changer, useful drilling head with grooving saw and end boring units this would make an ideal for the smaller workshop or offline manufacturing cell.
Cosma brushing machine 700S-2
NOW SOLD
This machine is ideal for de-nibbing/ sanding doors and panels. Through feed belt to transport the panels through.
Offered as
Sold
Vitap Alfa 27 spindle horizontal & vertical drilling machine
NOW SOLD
27 spindles drilling head for drilling carcass assembly holes or similar.